Process Chiller, Water-Cooled: W-80-600

GM chiller face righ Small 72dpi

Thermonics specializes in the design and manufacture of ultra-low temperature standard and custom fluid chillers for challenging applications. The W-80-600 FluidChill™ system is a low-temp, water-cooled chiller delivering high reliability and precision temperature control.

Download Chiller Data Sheet

  1. (*)
    Please let us know your name.
  2. (*)
    Please let us know your email address.

Chiller Specifications

Cooling and Heating Capacity

Cooling Capacity°C +25 0 -20 -40 -80
kW 2.5 2.5 2.3 2.1 0.6
Condenser Water-cooled
Process Heater 1.7kW
Fluid Range -85 to +50°C
Fluid Stability ±0.5°C (at rated load)

Pump and Process Fluid

Pump Gear
Process Fluid HFE-7100
Wetted Materials Copper or Stainless Steel
Flow Rate 2.8 GPM (10.6 LPM) at 50 PSIG
Available Pressure 50 PSIG (or less)
Fluid Connections 0.5” NPT

Controls and Compliance

User Interface 5.7” color touch-screen with temperature graphing and charting
Temperature Resolution 0.1°C full scale
Remote Communications Ethernet, Serial, USB
Alarms Low Flow, Low Reservoir, Out-of-temp Range, Drip Tray
Diagnostics Runtime hours (controller, chiller, compressor, pump), system performance log, valve activation counts, enclosure temperature
Compliance CE / RoHS / designed to meet UL1995/UL61010

Operating Requirements

Ambient Temperature Range 10 to 40°C
Power Requirement 3-phase, 208 to 230V, 60Hz
Facility Water Requirements Flow: 3.5 to 6.0 GPM (13.2 to 22.7 LPM)
Temperature: 10 to 32°C (20°C nominal)
Pressure: 10 to 50 PSIG
Connection: 0.75” NPT
System Dimensions
(approximate)
22.0”W X 42.0”D X 64.0”H (55.9 X 106.7 X 162.6 cm)

Cooling capacity with 50Hz power reduced by approximately 17%.
Consult factory for applications using other heat transfer fluids and flow rates.
Specifications subject to change.